Kylie Jones's Crystal Burst Earrings, Chain Maille Jewelry. Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop. These earrings are based on a very simple chain pattern.

Crystal Burst Earrings

by Kylie Jones
  • Category: Chain Maille
  • Technique(s): Chain Making, Making Loops
  • Skill Level: Beginner
These earrings are based on a very simple chain pattern. They are a burst of crystal reflections and color and remind me of the bouquet fireworks displays.

Materials

26 Gauge Round Half Hard .925 Sterling Silver Wire
H8-26H
  • Lesson Quantity: 24.00 inches
  • Purchase Quantity: 1.00 5FT
  • Price: $4.08
  • Gold Club Price: $3.06
Add to Bag
4mm Aquamarine 5328 Bi-Cone Swarovski Crystal Beads - Pack of 10
A13-56A
  • Lesson Quantity: 16.00 pieces
  • Purchase Quantity: 1.00 pieces
  • Price: $1.97
  • Gold Club Price: $1.48
Out of Stock
6mm Crystal 5328 Bi-Cone Swarovski Crystal Beads - Pack of 10
A13-53B
  • Lesson Quantity: 8.00 pieces
  • Purchase Quantity: 1.00 pieces
  • Price: $1.97
  • Gold Club Price: $1.48
Out of Stock
20 gauge AWG sterling silver jump rings 3.25mm ID
  • Lesson Quantity: 12.00 pieces
  • Purchase Quantity: 1.00 each
Add All Items to Cart

Tools

Round Nose Wire Pliers
G2-507
  • G2-507
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $32.95
  • Gold Club Price: $24.71
Add to Bag
Flat Nose Wire Pliers
G2-506
  • G2-506
  • Lesson Quantity: 2.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $32.95
  • Gold Club Price: $24.71
Add to Bag
5 inch Plato Slim Flush Cutters for Wire Working or Beading - Pack of 1
G35-3
  • G35-3
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $11.95
  • Gold Club Price: $8.96
Add to Bag
12 Inch Stainless Steel Ruler
G7-30
  • G7-30
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $2.97
  • Gold Club Price: $2.23
Add to Bag
Add All Items to Cart
Instructions
Step 1
Each crystal drop needs about 1" (2.5cm) of 26g wire. If you are comfortable working straight from your coil of wire this method will waste a lot less wire, otherwise just cut an inch piece off for each crystal. If you are working from the coil remember to put your crystal on first before you bend the end of the wire. For each crystal drop, put your crystal on the wire, with your flat-nose pliers grip the end 26g of wire and bend it back towards itself in a hook shape.
Kylie Jones's Crystal Burst Earrings - , Chain Maille Jewelry, Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop,
Step 2
Squeeze the hook tightly so that both sides of the hook are together leaving a little bulge at the bottom so the crystal can't fall off.
Kylie Jones's Crystal Burst Earrings - , Chain Maille Jewelry, Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop,
Step 3
Make a double wrapped loop at the top and flush cut the end. Use pliers or crimping pliers to squeeze the end snugly so there's no sharp end sticking out. Repeat Steps 1 & 2 for all the crystals.
Kylie Jones's Crystal Burst Earrings - , Chain Maille Jewelry, Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop,
Kylie Jones's Crystal Burst Earrings - , Chain Maille Jewelry, Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop,
Kylie Jones's Crystal Burst Earrings - , Chain Maille Jewelry, Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop,
Kylie Jones's Crystal Burst Earrings - , Chain Maille Jewelry, Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop,
Step 4
Place a clear and a blue crystal on a jump ring and close the ring.
Kylie Jones's Crystal Burst Earrings - , Chain Maille Jewelry, Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop,
Step 5
Take an open jump ring and go through the ring that is holding the 2 crystals, add 2 blue crystals, one on each side of the hanging jump ring and close the ring.
Kylie Jones's Crystal Burst Earrings - , Chain Maille Jewelry, Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop,
Kylie Jones's Crystal Burst Earrings - , Chain Maille Jewelry, Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop,
Kylie Jones's Crystal Burst Earrings - , Chain Maille Jewelry, Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop,
Step 6
Take an open jump ring and go through the previous ring, add a clear and a blue crystal, one on each side of the hanging ring, and close the ring. I add the clear crystal to the opposite side of the last clear crystal.
Kylie Jones's Crystal Burst Earrings - , Chain Maille Jewelry, Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop,
Step 7
Repeat step six.
Kylie Jones's Crystal Burst Earrings - , Chain Maille Jewelry, Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop,
Step 8
Add another ring and this time add 2 blue crystals in the same way.
Kylie Jones's Crystal Burst Earrings - , Chain Maille Jewelry, Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop,
Step 9
Repeat step 6. Then repeat Steps 4 - 9 for the second earring.
Kylie Jones's Crystal Burst Earrings - , Chain Maille Jewelry, Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop,
Step 10
The ear wires for these earrings are really small. This is so the crystal burst starts just below the ear lobe. Cut the 21g wire in half. With round-nose pliers, make a small loop at one end of each wire.
Kylie Jones's Crystal Burst Earrings - , Chain Maille Jewelry, Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop,
Step 11
Hold the wire on a pen, or mandrel, with the loop on the outside and bend the wire around the mandrel to the shape you want.
Kylie Jones's Crystal Burst Earrings - , Chain Maille Jewelry, Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop,
Step 12
Because the ear wires are small a longer tail with a bend in it will stop them from easily coming out of your ear. Flush cut the end and smooth any rough spots with a metal file or nail file. The ear wires need to be work hardened so they maintain their shape. You can do this by hammering them with a rawhide or plastic mallet, or put them in a jewelry tumbler.
Kylie Jones's Crystal Burst Earrings - , Chain Maille Jewelry, Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop,
Step 13
Attach the ear wires to the top rings added in step 9.
Kylie Jones's Crystal Burst Earrings - , Chain Maille Jewelry, Making Chain, Chain Making , Loops, Wire Loop, Wrapped Wire Loop,